RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
12-2
Section 12: Index
A
About button, 6-9
AC - Alternating Current, 11-1
Accepted Card Thickness, 2-2
Accepted Card Types, 2-2
Accepted Standard Card Sizes, 2-2
Access Card, 11-1
Adhesion, 11-1
Adjusting the Image Darkness, 4-43, 4-45
Agency Listings, 2-2
Algebraic, 6-29, 11-1
ANSI (American National Standards Institute), 11-1
AS400, 11-1
ASCII (American Standard Code for Information
Interchange), 11-1
AT, 11-1
automated Flipping Module, 2-12
B
B (Black), 11-1
Barcodes, 11-2
Batch print, 11-2
Battery Back-up, 11-2
Bi-directional, 11-2
BIOS (Basic Input/Output System), 11-2
Bit, 11-2
Bit map, 11-2
blocked Sensor, 4-31
Board, 11-2
Boot-up, 11-2
Buffer, 11-2
C
Cable, 11-2
Cache, 11-3
Calibrate tab, 4-34, 4-50, 6-41
Calibrating, 11-3
Cancel button, 2-6
Card Cleaning Roller, 2-6
Card Design, 2-11
Card Feeding Errors, 4-5, 4-6, 4-8, 4-10, 4-13, 4-16, 4-
18, 4-20, 4-23, 4-25, 4-27, 4-29, 4-31
card grid, 6-79
card grid area, 6-78
card grid lines, 6-80
card input, 6-113
Card Input Hopper, 2-6
Card Input Hopper Capacity, 2-2
card orientation, 6-81
card output, 6-113
Card Size, 2-11
card stock scratches, 4-40
Card Surface, 2-11
cards look pixilated or grainy, 4-53
card's Magnetic Stripe/smart chip, 6-35
CD (Compact Disc), 11-3
Centronics, 11-3
Cleaning Inside Printer, 4-41
Cleaning Roller, 11-3
Cleaning the Printhead, 4-40
Clear Protective Overlay Panel, 2-7
Coercivity, 11-3
Coercivity option, 6-54
Color matching, 11-3
Color Matching, 6-29
Color Matching software, 6-29
Colored Resin, 2-8
Colors, 2-2
Communication Errors, 4-2, 4-3
Compressed air, 11-3
Contrast, 11-3
Contrast / Gamma, printed image, 6-37
Control panel, 11-3
CR-100, 11-4
CR-79, 11-4
CR-80, 11-4
CR-80 card size, front/back, 6-97, 6-98, 6-99
CR-90, 11-4
CSA, 2-1
Cursor, 11-4
customization options, 6-57
D
Darkness, 11-4
Data Cables, 4-34
DB-9, 11-4
DC (Direct Current), 11-4
DC Motor, 11-4
Default, 11-4
Default button, 6-40
default location, 6-101
defined area, 6-81
Defined Area arrows, 6-82
Defined area(s), 6-100
Defined Area(s) check box, 6-100, 6-101, 6-102, 6-106,
6-107, 6-109, 6-110, 6-115, 6-117, 6-118, 6-121
Defined Area(s) option, 6-74, 6-79, 6-98
Defined/undefined area(s), 6-97, 6-99
Defrag, 11-4
Delete button, 6-82
Device Option tab, 4-27
Diagnostic Utility / Diagnostics Tool, 6-5
dimension boxes, 6-101
DIP switches (Dual In-line Package Switches), 11-4
Direct-to-Card (DTC) Printing, 11-5
Disable Printing option, 6-36
Disables Magnetic Verification, 4-55
disk cleanup utility, 4-3
Dither, 11-5
DMA (Direct Memory Access), 11-3
Dongle, 11-5
Dot, 11-5
Dot pitch, 11-5
To Next Page
Loading...
