Fargo DTC400e - Setting up Email Event Logging

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
5-36
Setting up Email Event logging
Follow this procedure to enable logging using email notification:
Step Procedure (Specify email logging)
1 Select the System Log link.
2 Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3 Select the Email radio button to choose email log notification.
4 Enter a valid e-mail address in the associated textbox.
5 Select Submit.
6 Log in as a root User if you are so prompted. (Note: Any change of setting
will only be accepted after you have successfully logged in.)