RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
6-54
Selecting the Coercivity/Magnetic Track
You can use the ISO option for encoding capability for either high- or low-coercivity cards on
Tracks 1, 2 and 3. This is the industry's standard mode of magnetic encoding.
Step Procedure
1 Select the Coercivity option (Oersted) to use the Magnetic Stripe type that
matches the card type.
• High Coercivity to Super Coercivity = 2750-4000 Oersted (Fargo’s High
Coercivity UltraCard IIIs are 2750 Oe)
• Low Coercivity = 300 Oersted
2 Select the Magnetic Track Selection option to specify which track is to be
configured through the Magnetic Track Options (if the application being used
requires customization of the standard ISO encoding process). See
Reviewing the Magnetic Track Options
.
To Next Page
Loading...
