Fargo DTC400e - Selecting the Undefined Area(S) Option (Front and Back Options)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
6-100
Selecting the Undefined Area(s) option (Front and Back options)
Step Procedure
1 Select Undefined Area(s) for the Printer Driver to print the resin black (K)
panel for all black found only in the space outside the defined areas. (Note: In
the card grid, black indicates the area in which the resin black (K) panel will be
printed.)