Fargo DTC400e - Selecting the Verimark Radio Button (Frontside Option Only)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
6-89
Selecting the VeriMark radio button (Frontside option only)
Step Procedure
1 Click either VeriMark or HoloMark as shown below. The foil options are used to
control the size of the exclusion area. (Note: When VeriMark is selected a
rectangle-sized area is excluded, HoloMark uses a square sized area.)
2 Click VeriMark (below) for the rectangle-sized area.