RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
6-64
Using the LRC Generation dropdown list
Use this option to customize the LRC Generation Mode (used to encode the magnetic data
on the currently selected track).
Step Procedure
1 Select No LRC to change the LRC Generation to none.
OR
Select Even Parity to change the LRC Generation to Even Parity. (Note:
This is the default for all tracks.)
OR
Select Odd Parity to change the LRC Generation to Odd Parity.
To Next Page
Loading...
Need help?
General
