Fargo DTC400e - Using the Overlay; Print Area Dropdown Menu

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
6-75
Using the Overlay / Print Area dropdown menu
Step Procedure
1 Select Full Card for the Printer to overlay and/or print the entire card.
OR
Select Defined Area(s) for the Printer to overlay and/or print only in the selected
and defined area or areas.
OR
Select Undefined Area(s) for the Printer to overlay and/or print only in the space
outside the selected and defined area.
OR
Select Omit Smart Chip Area for the Printer to overlay and/or print only in the
space outside the standard location of a smart chip.
OR
Select Omit Magnetic Stripe Area for the Printer to overlay and/or print only in
the space outside the standard location of an ISO Magnetic Stripe.
OR
Select Omit Signature Area for the Printer to overlay and/or print only in the
space outside the standard location of a signature panel.
(Note: In the card grid, black indicates the area in which the overlay and/or
printing will be applied.)