Fargo DTC400e - Using the Reboot pages

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
5-47
Using the Reboot pages
Rebooting the DTC400e restarts only the Ethernet Print Server.
Rebooting the Ethernet Server
The Reboot page allows the User to restart the Ethernet Print Server.
Step Procedure
1 Select the Administration link.
2 Log in as a root User (using the password) if you are so prompted. (Note:
Any change of setting will only be accepted after you have successfully
logged in.)
3 Select the Reboot link.
4 Select the Reboot button.