RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
4-38
Resolving the Flipper Jam Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: The Flipper Table Module is jamming.
• Printer Error State: The Flipper Table has jammed while either aligning
itself or flipping a card.
• Driver Monitor Error Display: Flipper Jam
To Next Page
Loading...
Need help?
General
