RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
6-2
DTC400e Print Driver Options
Using the Card tab
Adjusting the Card Size Option
Step Description
1 Click inches or mm to choose the desired unit of measurement.
(Note No.1: When designing a card format, always set the card size or page
size within the card design program to the exact dimensions of a CR-80 card.)
(Note No.2: The Card Size indicates that the Printer accepts standard, credit
card size CR-80 (ISO ID-1) cards. The dimensions of the total print area for this
card size appear in the Print Width: and Print Length: areas, as shown below.)
To Next Page
Loading...
