RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
6-21
Using the YMCFKO Ribbon in the Workbench (continued)
Step Procedure
2 Set the ribbon for YMCFKO or YMCFKOK in the Printing Preferences. (Note:
The Auto Detect button may also be used. The F panel ribbon must be
installed for this process to work.)
3 Once the driver is set for YMCFKO Ribbon and Workbench parameters are
set up correctly, the image printed from any software program will show the
Florescent images as place on the template.
To Next Page
Loading...
