Fargo DTC400e - Page 228

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
6-52
Using the Encoding Mode dropdown list (continued)
Category Description
Raw Binary
Encoding
selection
(continued from
the previous page)
Raw Magnetic Encoding
The User can select Raw Magnetic Encoding from the Driver.
Raw Coercivity
The User can select options for either High or Low Coercivity from
the Driver.
Raw Bit Density
The User can select the Configurable Bit Density option. This option
supports these standard configurable bit densities:
• 75 Bits Per Inch (BPI)
• 128 BPI
• 210 BPI
• Custom BPI
Raw Bit Density Per Track
The User can select the Configurable Bit Density option for each
individual magnetic encoding track.