C O N F I D E N T I A L – FEI Limited Rights Data 5-1
5
Operating Procedures
This chapter describes how to use the Microscope system from an application point of view. The following subjects
are covered:
• Specimen preparation and handling
• Optimizing imaging
• Standard detectors
• Capturing and handling a Single image
• Recording movies (saving multiple images)
• Stage control
• Measurement and annotation functions
• Patterning & milling
Caution!
These procedures assume you are familiar with the xT microscope Server and Microscope Control software (see
Chapter 3), which are necessary to start and operate the microscope.
To Next Page
Loading...
