4.4.9 RESET
Press the Reset key to delete aIl arbitrary wavefonns, to delete aIl stored setups and
DSO drivers, or to reset the Model 395 to its default values. After selecting one
of
the
sereen items, a second screen will give you a second chance before deleting the items.
4.4.9.1 Delete Waveforms
Selecting "delete waveforms
...
" erases aIl arbitrary waveforms from the unit's
memory.
NOTE
Once a waveform
is
deleted, it cannot be recovered.
4.4.9.2 Reset Parameters
Selecting "reset parameters
...
" resets the Model
3~)
to its default values. Arbitrary
wavefonns and stored settings are not affected by tbis selection.
Wavefonn
Sync
InternaI
5.0000 ms
Positive
+0.00 V
Start: 1.000kHz
Stop: 10.00 kHz
Up
1.000 sec
Continuous Sweep
1 direction
1
Linear
1.000
kHz
Direction
Time
Type
TrigCount
Spacing
Marker Freq
Source
Period
Slope
Level
Off
Auto
Source
Off
Off
Off
Reset Parameters Values
Frequency 1.000000000 kHz
Amplitude +1.000 Vp
Offset +0.000 Vdc
Mode Continuous
Trig Count
1
Filter Auto,
20
MHz Elliptic
Wavefonn
Standard, Sine
Sweep
Off
Range
TrigIn
Sync
AMIn
SumIn
Main Out
Delete Settings
Selecting "delete settings,
DSOs
...
" erases aIl stored settings
and
any
added
DSO
drivers.
NOTE
Once a Setting
or
DSO
driver is deleted it cannot be
recovered.
4-36 Front Panel Operation Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
