Fluke Wavetek-Datron 395 - 2 Initial Preparation; PREPARATION for STORAGE or Shipmei\Lt; Receiving and Inspecting Shipments; Returning Equipment for Repair

Initial Preparation
2.1 THIS SECTION
This section contains:
Receiving and Inspecting Shipments;
Returning Equipment
For Repair;
Preparation
For Storage or Shipment;
Preparation For Use;
Initial
Tum on;
Functional Checkout;
Routine Maintenance.
2.2 RECEIVING AND INSPECTING SHIPMENTS
Section 2
Use the following steps to inspect a shipment of Wavetek-Datron equipment.
1. Inspect the shipment. If the shipment is damaged have the driver describe the box
damage and list shortages on the delivery bill.
If you find unreported shortages or damage, notify the shipper before further
unpacking.
2. After unpacking the boxes. Save all
of the packing material.
3.
Inspect the equipment for damage. Inspect it carefully, regardless of the
condition
of the shipping boxes.
4.
If necessary, file a damage daim. If any damage is found, caU the shipper within
10 days and start the
daim process.
5. CalI Wavetek-Datron. CalI Wavetek-Datron's Customer Service department
and tell them that the equipment arrived damaged.
2.3 RETURNING EQUIPMENT FOR REPAIR
Use the following steps if you should ever need to return the Model 395 to Wavetek-
Datron for repair.
1. Save the packing mate rial. Always retum the equipment to Wavetek-Datron in
its original packing material and boxes.
If you use inadequate packing material,
you will have
to pay to repair any shipping damage. Carriers will not pay daims
on incorrectly packed equipment.
2. Call Wavetek-Datron for a Return Authorization. Wavetek-Datron's customer
service representative will ask for the name
of the person retuming the equipment
Plus,
the representative will ask for your telephone number, company name,
equipment type and serial number,
and a description of the problem.
Initial Preparation 2-1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com