Step 8 Offsetting the Square Wave -1.2 Vdc
To offset (baseline value) the square wave, press the OFFSET key to display the Offset
screen:
OFFSET
( )
OFFSET:
+0.00
Vdc
Using the keypad, press:
ENTER
+/- 1 • 2 0
( ] ('--
__
] (,------",]
('-------JI]
OFFSET:
-1.20 Vdc
Summary
If
you followed these steps, the scope displays a 4.58 MHz, 5.4 Vp-p square wave offset
-1.2 Vdc.
+1.5
-3.9
---4.58
MHz--
1
3.7
MODEl395
AS AN ARBITRARY WAVEFORM GENERATOR
Arbitrary waveform generators allow you to create and generate custom waveforms.
In
addition to using the front panel controls, which will
he
used in theseexamples, you can
use the Model
395'
s optional GPffi interface to upload waveforms from DSOs. AIso,
waveforms
can
be
created using waveform generation software like Waveform DSP.
3-10 Introduction
To
The Mode/395
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com