5.6.4 INITiate
INITiate
[:
IMMediate]
:CONTinuous
<Boolean>
INITiate[:IMMediate]
This program message supports the SCPI language definition, but changes no
setups within the Model 395.
INITiate:CONTinuous
<ON 1 OFF>
Sending this program message selects between continuous mode
of
operation and
a non-continuous mode
of
operation. In continuous, the selected trace orfunction
is continuously output at the Main Out, using the (default) command:
INIT:CONT
ON
Non-continuous modes include Triggered and Gated modes. Triggered mode
outputs the selected trace
or
function for a number
of
cycles determined by the
trigger COUNt once
per
triggering event at the Main Out, using the command:
INIT:CONT
OFFi:TRIG:GATE
OFFj:TRIG:COUN
<value>
Gated mode causes the selected function
or
trace to
be
output while the trigger
source is trne, and quiescent while the source
is
false. There are two GATE
submodes, as shown in the command:
INIT:CONT
OFF;:TRIG:GATE
ON;MODE
<ASYN
1
SYNC>
5.6.5 MMEMory
MMEMory
:CATalog?
:DELete
[
:SETup]
:DSO
:INITialize
:LOAD
[
:SETup]
:STORe
[:
SETup]
:DLOad
[ :DSO]
MMEMory:CATalog?
Sending the query returns the CATalog listing
of
the Model 395 internaI memory.
Returned format is <bytes_used>,<bytes_free>,name,size,name,size,
..
,
MMEMory:DELete[:SETup]<setup_name>
Sending this command causes the setup_name
in
memory to
be
deleted. The
setup_name must contain the file extension .SET to correctly identify the file.
MMEMory:DELete:DSO<DSO_name>
Sending tms command causes the
DSO
_name in memory to bedeleted. The file
must contain the file extension
If
.DSOIf
to correctly identify the file.
Remote Operation 5-29
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
