Triggered Mode Check
Press the MODE key. From the Mode screen, press F4 "trig'd."
This check uses the Model 395's internal trigger source which is programmed to
5 ms.
Observe: Scope displays a triggered waveform with a count
of
1;
see below:
This completes the functional test. Remove aIl cables and test equipment.
2.9 OPERATOR MAINTENANCE
2.9.1 Routine Maintenance
Cleaning
materialsNo tools
or
equipment
are required for routine maintenance.
required are listed below:
Description
Cotton Cheesecloth
National Stock Number
8305-00-267-3015
CCC-C-440, Type II,
Class 2 (81349)
Mild Liquid Detergent None
Routine maintenance for the Model 395 is limited to routine tasks such as listed below;
Cleaning, using cloth moistened with detergent
Dusting,
Wiping,
Checking for frayed cables,
Storing items not
in
use,
Covering unused receptacle,
Checking for loose screws.
Perform these routine tasks as required.
2-6 Initial Preparation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
