1.2 ORGANIZATION OF THIS MANUAL
Installation and Preparation For Use
Section 2 tells you how to set up and check out the Model 395 before you use it. It also
familiarizes you with the physical setup
of
the unit.
Introduction To The Model 395
Section 3 describes the fundamentals
of
front panel operation using a series
of
examples.
Operation Reference
Section 4 provides detailed explanations for every function and feature
of
the Model 395.
Remote Operation
Section 5 provides an introduction to the set up
and
operation
of
the Model 395 from
remote sources using the standard RS-232 or optional IEEE-488.2 interfaces.
It
also
contains the Model
395's
SCPI remote command set and IEEE-488.2 Common
Commands.
Specifications
Appendix A, located
at
the rear
of
this manual, contains the detailed specifications for
the Mode1395.
Menu Quick Reference
Appendix B contains quick reference diagrams
of
the
Model395's
menu
structure.
SCPI Quick Reference
Appendix C contains quick reference diagrams
of
the Model 395's SCPI command tree.
The SCPI information is presented as a "Primer". This appendix also contains the SCPI
required Conformance Information.
Rack Adapter Instructions
Appendix 0 contains instructions for mounting the Madel 395 in an instrument rack.
DSO Upload
Appendix F contains instructions on
osa
uploading to the Model 395. Plus, appendix
F describes how to create and load
osa
driver flIes for
osas
not included in the unit's
firmware.
Verification and Alignment Procedures
Appendix G contains
bath
the verification test procedure and alignment procedure for
the Mode1395.
1-2 Introduction
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
