SCPI Command - Quick Reference
C.1
INTRODUCTION
Appendix C
Appendix C summarizes the Model 395 SCPI (Standard Commands for Programmable
Instrumentation) commands
in
two formats: command tree figures and command table.
These figures and the table provide a quick overview
of
the commands used by the Model
395 and do notcontain a great deal
of
detail. Section 5
of
this manual contains detailed
descriptions
of
each
of
the commands.
C.2 MODEL 395 SCPI COMMAND TREES
Figures
C-I
through
C-7 provide
the
programmer/operator a complete
set
of
SCPI
Commandtrees for the Mode1395. These trees are an altemate method to the Command
Table
of
constructing syntactically correct SCPI commands.
C.3 MODEL 395 SCPI COMMAND TABLE
Table
C-l,
Mode1395 SCPI Command Syntax, provides the programmer/operator with
a complete
set
of
SCPI Commands for the Mode1395. The Command Table provides
another altemate method
of
constructing syntactically correct SCPI commands. Plus,
the command table includes "SCPIConformance Information" as required
by
the SCPI
specification.
SCP! Command - Quick Reference C-1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
