Fluke Wavetek-Datron 395 - Page 250

KEYWORD
Table C-1. Model395 SCPI Command Syntax (Continued)
<PARAMETER FORM>
(min., max, ; default)
NOTES
TRACe
:CATalog?
[:DATA]
:LINE
:POINt
:DEFine
:DELete
[:NAME]
:ALL
:DIRectory?
:FREE?
[TOTal]
:LIMits
:MODE
:POINts
:REName
SELect
'rRIGger
[:SEQuence]
:COUNt
:GATE
[:STATe]
[:IMMediate]
[:ONCe]
:STATe
:LEVel
:POLarity
:SOURce
[:STARt]
:TIMer
<trace_name>,(<trace_name>l<block»
<trace_name>,<poincindex1>,<poinCvalue1>,
<poincindex2>,<poinCvalue2>
<trace_name>, <poinCindex>,
<poincvalue>
<trace_name>,(<trace-ftame>l<integecnumeric_value»
(10, 65536; 8192)
<points available>,<points in use>
<trace_name>, <starcindex>, <stop_index>
(0,131071;0),(0,131071;0)
<CWIRASTer>
<trace_name>,<integecnumeric_value>
(5, 32768; 8192)
<old_trace_name>,<new_trace_name>
<trace_name>
<integecnumeric_value> (1, 1048575;
1)
<Boolean> (on, 1; off, 0)
<Boolean> (on,
1; off, 0)
<real_numeric_value> (-10.0, 10.0; 0.0)
<POSitiveINEGative>
<INTemalIEXTemalIMANual>
<real_numeric_value> (2e-7, 1e4; 5e-3)
Confrrmed
Confirmed
Confirmed
Confirmed
Not SCPI Approved
Confirmed
Confrrmed
Confirmed
Confrrmed
Not SCPI Approved
Confrrmed
Not SCPI Approved
Not SCPI Approved
Not SCPI Approved
Confirmed
Not SCPI Approved
Not SCPI Approved
Confirmed
Confrrmed
Confrrmed
Not SCPI Approved
Not SCPI Approved
Confrrmed
Confrrmed
Confirmed
Confrrmed
Not SCPI Approved
Confirmed
1
Not SCPI Approved
Confirmed
1. Deviee dependent parameter character data.
2. Incomplete implementation; at least one parameternot supported
per SCPI specification.
3. STATus Subsystem commands operate per the specification,
but the physical Status Registers are Dot
implemented in the hardware.
SCPt Command - QiJiëk Reference C-15
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com