Foundry Configuration Guide for the FESX, FSX, and FWSX
19 - 28 © Foundry Networks, Inc. December 2005
This display shows the following information.
Displaying the PIM Multicast Cache
To display the PIM multicast cache, enter the following command at any CLI level:
Syntax: show ip pim mcache
This Field... Displays...
Source Indicates the source of the PIM Sparse group.
Group Indicates the PIM Sparse group.
Parent Indicates the port or virtual interface from which the Layer 3 Switch
receives packets from the group’s source.
CamFlags This field is used by Foundry technical support for troubleshooting.
CamIndex This field is used by Foundry technical support for troubleshooting.
Fid This field is used by Foundry technical support for troubleshooting.
Flags This field is used by Foundry technical support for troubleshooting.
FastIron SuperX Router(config-pim-router)# show ip pim mcache
1 (*,239.255.162.1) RP207.95.7.1 forward port v1, Count 2
member ports ethe 3/3
virtual ports v2
prune ports
virtual prune ports
2 (209.157.24.162,239.255.162.4) forward port v2, flags 00004900 Count 130
member ports
virtual ports
prune ports
virtual prune ports
3 (209.157.24.162,239.255.162.1) forward port v2, flags 00005a01 Count 12
member ports ethe 3/8
virtual ports
prune ports
virtual prune ports