EasyManuals Logo

Foundry Networks FESX User Manual

Foundry Networks FESX
820 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #740 background imageLoading...
Page #740 background image
Foundry Configuration Guide for the FESX, FSX, and FWSX
A - 14 © Foundry Networks, Inc. December 2005
Informational Bridge root changed, vlan <vlan-id>, new
root ID <string>, root interface <portnum>
A Spanning Tree Protocol (STP) topology
change has occurred.
The <vlan-id> is the ID of the VLAN in which
the STP topology change occurred.
The <root-id> is the STP bridge root ID.
The <portnum> is the number of the port
connected to the new root bridge.
Informational Bridge topology change, vlan <vlan-id>,
interface <portnum>, changed state to
<stp-state>
A Spanning Tree Protocol (STP) topology
change has occurred on a port.
The <vlan-id> is the ID of the VLAN in which
the STP topology change occurred.
The <portnum> is the port number.
The <stp-state> is the new STP state and
can be one of the following:
•disabled
• blocking
• listening
• learning
•forwarding
• unknown
Informational Cold start The device has been powered on.
Informational DOT1X : port <portnum> - mac <mac
address> Cannot apply an ACL or MAC filter
on a port member of a VE (virtual interface)
The RADIUS server returned an IP ACL or
MAC address filter, but the port is a member
of a virtual routing interface (VE).
Informational DOT1X : port <portnum> - mac <mac
address> cannot remove inbound ACL
An error occurred while removing the
inbound ACL.
Informational DOT1X : port <portnum> - mac <mac
address> cannot remove outbound ACL
An error occurred while removing the
outbound ACL.
Informational DOT1X : port <portnum> - mac <mac
address> Downloading a MAC filter, but
MAC filter have no effect on router port
The RADIUS server returned an MAC
address filter, but the <portnum> is a router
port (it has one or more IP addresses).
Informational DOT1X : port <portnum> - mac <mac
address> Downloading an IP ACL, but IP
ACL have no effect on a switch port
The RADIUS server returned an IP ACL, but
the <portnum> is a switch port (no IP
address).
Informational DOT1X : port <portnum> - mac <mac
address> Error - could not add all MAC filters
The Foundry device was unable to
implement the MAC address filters returned
by the RADIUS server.
Informational DOT1X : port <portnum> - mac <mac
address> Invalid MAC filter ID - this ID
doesn't exist
The MAC address filter ID returned by the
RADIUS server does not exist in the Foundry
device’s configuration.
Table A.3: Foundry Syslog Messages (Continued)
Message Level Message Explanation

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foundry Networks FESX and is the answer not in the manual?

Foundry Networks FESX Specifications

General IconGeneral
BrandFoundry Networks
ModelFESX
CategorySwitch
LanguageEnglish

Related product manuals