Foundry Networks FESX - Page 750

Foundry Configuration Guide for the FESX, FSX, and FWSX
A - 24 © Foundry Networks, Inc. December 2005
Notification OSPF intf rcvd bad pkt, rid <router-id>,
intf addr <ip-addr>,
pkt src addr <src-ip-addr>,
pkt type <pkt-type>
Indicates that an OSPF interface received a
bad packet.
The <router-id> is the router ID of the
Foundry device.
The <ip-addr> is the IP address of the
interface on the Foundry device.
The <src-ip-addr> is the IP address of the
interface from which the Foundry device
received the authentication failure.
The <packet-type> can be one of the
following:
•hello
• database description
• link state request
• link state update
• link state ack
• unknown
Notification OSPF intf rcvd bad pkt: Bad Checksum, rid
<ip-addr>, intf addr <ip-addr>, pkt size
<num>, checksum <num>, pkt src addr <ip-
addr>, pkt type <type>
The device received an OSPF packet that
had an invalid checksum.
The rid <ip-addr> is Foundry device’s router
ID.
The intf addr <ip-addr> is the IP address of
the Foundry interface that received the
packet.
The pkt size <num> is the number of bytes in
the packet.
The checksum <num> is the checksum value
for the packet.
The pkt src addr <ip-addr> is the IP address
of the neighbor that sent the packet.
The pkt type <type> is the OSPF packet type
and can be one of the following:
•hello
• database description
• link state request
• link state update
• link state acknowledgement
• unknown (indicates an invalid packet
type)
Table A.3: Foundry Syslog Messages (Continued)
Message Level Message Explanation