EasyManuals Logo

Foundry Networks FESX User Manual

Foundry Networks FESX
820 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #751 background imageLoading...
Page #751 background image
Using Syslog
December 2005 © Foundry Networks, Inc. A - 25
Notification OSPF intf rcvd bad pkt: Bad Packet type, rid
<ip-addr>, intf addr <ip-addr>, pkt size
<num>, checksum <num>, pkt src addr <ip-
addr>, pkt type <type>
The device received an OSPF packet with an
invalid type.
The parameters are the same as for the Bad
Checksum message. The pkt type <type>
value is “unknown”, indicating that the packet
type is invalid.
Notification OSPF intf rcvd bad pkt: Invalid packet size,
rid <ip-addr>, intf addr <ip-addr>, pkt size
<num>, checksum <num>, pkt src addr <ip-
addr>, pkt type <type>
The device received an OSPF packet with an
invalid packet size.
The parameters are the same as for the Bad
Checksum message.
Notification OSPF intf rcvd bad pkt: Unable to find
associated neighbor, rid <ip-addr>, intf addr
<ip-addr>, pkt size <num>, checksum
<num>, pkt src addr <ip-addr>, pkt type
<type>
The neighbor IP address in the packet is not
on the Foundry device’s list of OSPF
neighbors.
The parameters are the same as for the Bad
Checksum message.
Notification OSPF intf retransmit, rid <router-id>,
intf addr <ip-addr>, nbr rid <nbr-router-id>,
pkt type is <pkt-type>, LSA type <lsa-type>,
LSA id <lsa-id>, LSA rid <lsa-router-id>
An OSPF interface on the Foundry device
has retransmitted a Link State
Advertisement (LSA).
The <router-id> is the router ID of the
Foundry device.
The <ip-addr> is the IP address of the
interface on the Foundry device.
The <nbr-router-id> is the router ID of the
neighbor router.
The <packet-type> can be one of the
following:
•hello
database description
link state request
link state update
link state ack
unknown
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
Notification OSPF LSDB approaching overflow,
rid <router-id>, limit <num>
The software is close to an LSDB condition.
The <router-id> is the router ID of the
Foundry device.
The <num> is the number of LSAs.
Table A.3: Foundry Syslog Messages (Continued)
Message Level Message Explanation

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foundry Networks FESX and is the answer not in the manual?

Foundry Networks FESX Specifications

General IconGeneral
BrandFoundry Networks
ModelFESX
CategorySwitch
LanguageEnglish

Related product manuals