Foundry Networks FESX - Page 755

Using Syslog
December 2005 © Foundry Networks, Inc. A - 29
Notification OSPF virtual intf rcvd bad pkt,
rid <router-id>, intf addr <ip-addr>,
pkt src addr <src-ip-addr>,
pkt type <pkt-type>
Indicates that an OSPF interface received a
bad packet.
The <router-id> is the router ID of the
Foundry device.
The <ip-addr> is the IP address of the
interface on the Foundry device.
The <src-ip-addr> is the IP address of the
interface from which the Foundry device
received the authentication failure.
The <packet-type> can be one of the
following:
•hello
• database description
• link state request
• link state update
• link state ack
• unknown
Notification OSPF virtual intf retransmit, rid <router-id>,
intf addr <ip-addr>, nbr rid <nbr-router-id>,
pkt type is <pkt-type>, LSA type <lsa-type>,
LSA id <lsa-id>, LSA rid <lsa-router-id>
An OSPF interface on the Foundry device
has retransmitted a Link State
Advertisement (LSA).
The <router-id> is the router ID of the
Foundry device.
The <ip-addr> is the IP address of the
interface on the Foundry device.
The <nbr-router-id> is the router ID of the
neighbor router.
The <packet-type> can be one of the
following:
•hello
• database description
• link state request
• link state update
• link state ack
• unknown
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
Table A.3: Foundry Syslog Messages (Continued)
Message Level Message Explanation