2. Next to Confirmation Sheet, click On to print a confirmation sheet for every scan,
or select Errors Only to only print a confirmation sheet if an error occurs.
3. Next to File Name Extension, select whether extentensions should be reflected in
lower case or upper case letters.
4. If you are using a remote template pool server, next to Refresh Start Time, select
the time of day (0:00-23:59) when the list of templates will be refreshed.
5. Click Refresh Templat List Now to refresh the list immediately.
Configuring File Repository Settings
A file repository is a network location where scanned images are stored. You must
configure the file repository settings before you can create a template.
The printer supports the following transfer protocols:
• FTP
• SMB
• HTTP/HTTPS
Before you begin:
1. Ensure that FTP services are running on the server or computer to be used to store
scanned image files. Note the IP address or host name.
2. Create a user account and password with read and write access for the printer to
use to access the repository folder. Note the user name and password.
3. Create a folder within the FTP root. Note the directory path, user name, and
password. This is your file repository.
4. Test the connection. Log into the file repository from a computer with the user name
and password. Create a new folder in the directory, then delete it. If you cannot do
this, check the user account access rights.
FTP
Before you begin:
• Ensure that FTP services are running on the server or computer to be used to store
scanned image files. Note the IP address or host name.
• Create a user account and password with read and write access for the printer to use
to access the repository folder. Note the user name and password.
• Create a folder within the FTP root. Note the directory path, user name, and password.
This is your file repository.
• Test the connection. Log into the file repository from a computer with the user name
and password. Create a new folder in the directory, then delete it. If you cannot do
this, check the user account access rights.
To configure FTP repository settings:
Xerox
®
Color C60/C70 Printer10-8
System Administrator Guide
Scanning