2
Initial Setup
This chapter includes:
• Physical Connection
• Initial Setup at the Control Panel
• Initial Setup in CentreWare Internet Services
• Enabling Services and Options
Physical Connection
To connect your printer:
1. Connect the power cable to the printer, and plug it into an electrical outlet.
2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port in
the back of the printer. Connect the other end of the cable to a correctly configured
network port.
3. If you have purchased and installed the Fax Hardware Kit, connect the printer to a
correctly configured telephone line.
4. Turn the printer on.
Initial Setup at the Control Panel
The Installation Wizard
The first time the printer is turned on, the Installation Wizard starts. The wizard prompts
you with a series of questions to help you configure basic settings for your printer. You
are prompted to:
• Set the current date and time.
2-1 Xerox
®
Color C60/C70 Printer
System Administrator Guide
To Next Page
Loading...
Need help?
General
