• Card Reader: You must purchase and install a magnetic or proximity card reading
system, such as Xerox
®
Secure Access. To access the printer, users must swipe a
pre-programmed identification card.
Authorization
Authorization is the process of defining the services and features that users are allowed
to access. For example, you can configure the printer to allow a user to copy, scan, and
fax, but not email. There are two types of authorization:
• Locally on the Device (Internal Database): User login information is stored locally
in the printer's internal User Information Database.
• Remotely on the Network: User login information is stored externally in a network
database such as an LDAP directory.
Personalization
Personalization is the process of customizing services for a specific user. If your network
is connected to an LDAP server, the printer can look up a user's home directory and email
address when using the Scan to Home, or email scanning features.
Note
Personalization is only available when the printer is configured to use network
authentication.
Local Authentication
Setting Up Local Authentication
To configure local authentication:
1. In CentreWare Internet Services, click Properties > Security > Authentication
Configuration.
2. On the Authentication Configuration page, next to Login Type, select Login to Local
Accounts.
3. Select Enabled next to Print Stored File from Folder or Folder to PC/Server to enable
these services.
4. Select Enabled next to Non-account Print to allow users without accounts to access
the printer.
5. Click Apply, then click Reboot Machine.
Xerox
®
Color C60/C70 Printer6-2
System Administrator Guide
Security
To Next Page
Loading...
Need help?
General
