1. In CentreWare Internet Services, access Properties > General Setup > SMart
eSolutions Setup > Proxy Server.
2. Click the Enabled check box next to Use Proxy Server.
3. In the Proxy Setup menu, select Different Proxy for Each Protocol if you use a
different proxy server for each different protocol used on your network (HTTP,
HTTPS) or keep the default setting of the Same Proxy for All Protocols.
4. In the HTTP Server and HTTPS Server Names fields, provide a name of up to 255
characters for one or both of these Proxy Servers. A fully qualified domain name or
an IP Address can be used.
Note
If you use Domain Names, ensure that DNS Server details are configured correctly.
5. Enter the required Port Number. The default is 8080 and is the Internet Assigned
Network Authority (IANA) recognized proxy port.
6. If your proxy server requires authentication, click the Authentication: Enabled check
box and enter the Login Name and Password to provide authentication to the proxy
server.
7. Click Apply.
Communication Status
The SMart eSolutions Communication Status page reflects the printer’s serial number
and whether the printer is currently configured for SMart eSolutions as well as the date
the last transmission was sent to the Xerox
®
Communication Server.
17-5 Xerox
®
Color C60/C70 Printer
System Administrator Guide
Xerox® Remote Print Services
To Next Page
Loading...
Need help?
General
