3. Update the fields with your desired information and click Apply.
Updating the Printer Software
When Xerox releases a new version of printer software or firmware, you can update your
printer to incorporate the new fixes and improvements.
Updating the Software
Before you begin:
• Determine the current software version of your printer.
• Download the latest software update file in .bin format from the Drivers and
Downloads page for your specific printer.
To determine the currently installed software version:
1. In CentreWare Internet Services, click Properties > General Setup > Configuration.
2. Scroll down to Software to verify the software version.
To update the software:
1. In CentreWare Internet Services, click Properties > Services > Machine Software
> Upgrades.
2. Under Upgrades select Enabled.
3. Click Apply.
4. Refresh you browser and navigate to Properties > Services > Machine Software >
Manual Upgrade.
5. Under Manual Upgrade, click Choose File to locate and select the software upgrade
file in .bin format.
6. Click Open.
7. Click Install Software. The file is sent to the printer. Once the software is installed,
the printer restarts.
8. Check the configuration report to verify that the software version has updated.
Date and Time Settings
When the printer is first set up, you are asked to set the date and time. If you want to
change the date and time after the initial setup, use the Control Panel to change the
settings. You can also use date and time settings to enable Network Time Protocol (NTP)
synchronization, set energy savings, and set other timing functions for the printer.
To change date and time settings:
Xerox
®
Color C60/C70 Printer13-10
System Administrator Guide
Administrator Tools
To Next Page
Loading...
Need help?
General
