Xerox® Scan Utility
The Xerox
®
Scan Utility (XSU) allows you to scan directly to your computer and helps
you manage and distribute scanned image files. Before you can scan, you must create
a template in the utility. The template is saved on the printer. The scan utility is installed
when you install scan drivers. For instructions explaining how to use this feature, see the
User Guide at www.xerox.com/support.
Note
Secure HTTP (SSL) must be enabled, and a certificate must be installed on the printer
before you can scan using XSU.
Note
The SMB protocol must be enabled on your computer. SMB is not enabled by default
on Macintosh computers.
Note
Templates created in XSU cannot be deleted from the printer using CentreWare Internet
Services. Templates must be deleted in XSU by the user who created the template.
Enabling Network Scan Utility 3
Network Scan Utility 3 allows you to scan directly to your computer and helps you
manage and distribute scanned image files. Before you can use the utility, you must
enable SNMP, SOAP, and WebDAV.
To enable port settings to run the Network Scan Utility 3:
1. In CentreWare Internet Services, click Properties > Connectivity > Port Settings.
2. Next to SNMP, SOAP, and WebDAV, select Enabled.
3. Click Apply.
You can now install and use the scan utility.
Xerox
®
Color C60/C70 Printer10-20
System Administrator Guide
Scanning
To Next Page
Loading...
Need help?
General
