5. Choose an option from the Payload Type drop-list. Generally, the default option
will meet most needs.
6. Click Apply to save your settings.
7. Click Test XCDG Connection to test the communication between your printer and
the Xerox server.
The screen changes to simulate communication transmission, and again, to confirm
success or failure of the test.
Note
If you wish to terminate service, de-select the Enabled check box, type a brief reason
for your request in the Reason field, and select your job function from the Role
drop-list.
One more data transmission will occur after you request service termination.
Accessing the Meter Assistant®
To access the Meter Assistant
®
screen:
1. In CentreWare Internet Services, access Properties > General Setup > SMart
eSolutions Setup.
2. Click Meter Assistant.
The Meter Assistant screen shows the details of dates when billing meter reads were
sent to Xerox by the device.
Accessing the Supplies Assistant®
To access the Supplies Assistant
®
screen:
17-7 Xerox
®
Color C60/C70 Printer
System Administrator Guide
Xerox® Remote Print Services
To Next Page
Loading...
Need help?
General
