Forced Annotations
Forced annotations allow you to create text strings for custom watermarks. You can
create up to eight strings with a maximum of 32 characters. Once the string is created,
you can apply a layout template to the watermark.
To create annotation text strings:
1. In CentreWare Internet Services, click Properties > Security > Force Annotation >
Create Text String.
2. Type up to eight annotation text strings with a maximum of 32 characters each.
3. Click Apply.
To apply layouts to text strings:
1. In CentreWare Internet Services, click Properties > Security > Force Annotation >
Apply Layout Template to Copy/Print Jobs.
2. Under Apply Layout Template to Copy / Print Jobs, click Change Settings to apply
the template to the annotation text string using one of the available types of print
jobs.
3. Next to Apply Layout Template, select Enabled to apply the layout template.
4. Under Layout Template List, select one of the preset templates from the list.
5. Click Apply.
Memory Settings
You can increase performance by allocating memory away from ports that are not being
used or allocating more memory to more heavily used ports.
1. In CentreWare Internet Services, click Properties > General Setup > Memory
Settings.
2. Under Memory Settings, specify memory allocation and spooling behavior.
13-13 Xerox
®
Color C60/C70 Printer
System Administrator Guide
Administrator Tools
To Next Page
Loading...
Need help?
General
