2. Touch System Settings > Fax Service Settings > Original Size Defaults.
3. Choose one of the pre-configured settings from the list or select an item in the list.
4. To modify an option, select the item in the list, touch Change Settings, and modify
the default settings as desired.
Fax Confirmation Report
You can configure a confirmation sheet to notify users if a fax transmission was not
successful.
To enable fax transmission error confirmation sheet printing:
1. In CentreWare Internet Services, click Properties > Services > Fax > Defaults.
2. Next to Confirmation Sheet, select Errors Only.
3. Click Apply.
Server Fax
The Server Fax kit allows you to send a fax over a network to a fax server, which then
sends the fax to a fax machine over a phone line.
Before you can send a server fax, you must configure a fax filing repository, or filing
location. Once configured, the printer transfers faxed images to the repository. The fax
server retrieves the documents from the repository and transmits them over the telephone
network. You can also print a transmission report.
You can set up a repository that uses one of the following protocols:
• FTP
• SMB
• SMTP
Enabling Server Fax
Before you begin, purchase and install the optional Server Fax Kit.
To enable the Server Fax functionality:
1. In CentreWare Internet Services, click Properties > Services > Fax > Fax Settings.
2. Next to Fax Service, select Scan to Fax Server.
3. Click Apply.
Xerox
®
Color C60/C70 Printer11-6
System Administrator Guide
Faxing
To Next Page
Loading...
Need help?
General
