8
Image Registration Setups
Adjusting Image Alignment
Adjustments can be made to the image based on the alignment output of a document.
Various adjustments can be modified such as magnification and skew. This can be
achieved through the use of the twenty default adjustment types. In addition, a specific
paper tray can be assigned to a specific adjustment type.
Adjustments can be made when the position of the output image is misaligned or skewed.
This may be a result of paper expansion or contraction, cutting inaccuracy, or paper
storage conditions. Use Alignment Adjustment Setting features to compensate for
misalignment and skew.
The following alignment adjustments can be made to the position of the output image.
These are described in more detail in the following pages.
• Perpendicularity Adjustment: Adjust an image to be straight up or down.
• Skew Adjustment: Adjust a skewed image.
• Magnification Adjustment: Adjust this when the size (scale) of the printed image is
offset.
• Print Position Adjustment: Use this option when making adjustments to the lead
edge of the image (X direction) and side edge of the image (Y direction). For example,
use this when the images on sides 1 and 2 are misaligned.
Note
When making adjustments to multiple items, adjust the image in the following order:
Perpendicular, Skew, Magnification, and finally Print Position Adjustment.
Note
Select an adjustment and then Change Settings to view the effect the settings will
have on the image.
8-1 Xerox
®
Color C60/C70 Printer
System Administrator Guide
To Next Page
Loading...
Need help?
General
