14
Secure Access
This section describes how to configure Xerox
®
Secure Access using the USB card reader.
The USB card reader is connected directly to the USB port on this device. When the USB
card reader is connected to the device, the traditional Type A USB card reading device
is no longer required.
Pre-requisites
• Xerox
®
Secure Access Unified ID System
®
• Device software
• Equitrac Provider and Libraries for USB Card Reader
Note
Plug-Ins can be downloaded from the Xerox website (www.xerox.com).
• Support Card and Cards Readers. Please see Xerox
®
Secure Access documentation
on supported Card and Card Readers
• Configuration - SSL (Secure Socket Layer) has to be enabled
Note
Extensible Service Setup has to be enabled if the Xerox
®
Extensible Interface Platform
®
application is used.
Installation
Connecting the USB Card Reader
Connect the USB Card Reader to the USB port on the device.
14-1 Xerox
®
Color C60/C70 Printer
System Administrator Guide
To Next Page
Loading...
Need help?
General
