Feature Access Setup
Note
Feature Access Setup requires that Authentication is enabled and Tools and Feature
Access are configured to require users to log in before they can access features.
You can set specific access to the color copying feature of the printer listed on the Feature
Access page.
To set up feature access:
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols >
LDAP > LDAP Authorization Process.
2. Under Feature Access and the Access Group setting, type the names of the LDAP
groups allowed to access each individual feature.
3. Continue with other access settings or scroll down and click Apply.
• User Roles Access Setup
• Device Access Setup
• Service Access Setup
Digital Certificates
A digital certificate must be installed on the printer before you can enable secure HTTP
(SSL). A digital certificate is a set of data used to verify the identity of the holder or
sender of the certificate. A certificate includes the following data:
• Information about the person, organization, or computer that the certificate is issued
to, including the name, location, email address, and other contact information.
• Serial number of the certificate
• Expiration date of the certificate
• Name of the certificate authority (CA) that issued the certificate
• A public key
• A certificate authority’s digital signature
Installing a Digital Certificate
There are three ways to install a certificate on the printer:
• Create a Self-Signed Certificate. A Self-Signed Certificate is the result when the printer
creates its own certificate, signs it, and creates a public key for the certificate to be
used in SSL encryption.
6-11 Xerox
®
Color C60/C70 Printer
System Administrator Guide
Security
To Next Page
Loading...
Need help?
General
