Configuring T.38 Settings
T.38 settings should only be changed if network policy does not allow the default settings.
To configure T.38 settings:
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols >
T.38.
2. Select a T.38 Transport Protocol.
3. Enter the appropriate Port Numbers in the fields provided.
4. Click Apply.
Configuring SIP Settings at the Printer Control Panel
Commonly used SIP Fax settings can be changed on the Fax Options tab of the Control
Panel. Additionally, the following SIP Fax settings can be viewed and edited by accessing
the Tools tab in System Administrator mode:
• Fax Screen Default Settings: set the Default Fax Screen Tab options, Address Book
Speed Dial Numbers, and Transmission Screen options.
• Fax Default Settings: Set the Resolution, Original Type, Starting Rate, etc.
• Fax Control Settings: Re-enter Recipient Data, Transmission Header Text, Rotation
settings, etc.
• Fax Received Options Settings: Set up folders for received faxes.
• Output Destination Settings: Set the appropriate tray for received faxes.
• Local Terminal Information: Set the Local Name, Company Logo, G3 SIP Line ID,
etc.
11-13 Xerox
®
Color C60/C70 Printer
System Administrator Guide
Faxing
To Next Page
Loading...
Need help?
General
