Fuji Xerox Color C70 System Administrator Guide

Device Access Setup
Note
Device Access setup requires that Authentication is enabled and Tools and Feature
Access are configured to require users to log in before they can access pathways.
To set up device access:
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols >
LDAP > LDAP Authorization Process.
2. Under Device Access, in the Services Pathway, type the name of a group, defined
at the LDAP server, that you want to use to provide access to the Services features
on the printer.
3. Repeat the same process for the Job Status Pathway and the Machine Status
Pathway.
4. Continue with other access settings or scroll down and click Apply.
• User Roles Access Setup
• Service Access Setup
• Feature Access Setup
Service Access Setup
Note
Service Access Setup requires that Authentication is enabled and Tools and Feature
Access are configured to require users to log in before they can access services.
You can specify access to the services of the printer under Service Access. Type the names
of the LDAP groups for any of the services listed.
To set up service access:
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols >
LDAP > LDAP Authorization Process.
2. Under Service Access and the Access Group setting, type the names of the LDAP
groups allowed to access each of the individual printer services.
3. Continue with other access settings or scroll down and click Apply.
• User Roles Access Setup
• Device Access Setup
• Feature Access Setup
Xerox
®
Color C60/C70 Printer6-10
System Administrator Guide
Security

Fuji Xerox Color C70 Specifications

General

Brand	Fuji Xerox
Model	Color C70
Category	All in One Printer
Language	English