Fuji Xerox Color C70 System Administrator Guide

Note
When you want to specify the number of sheets separately, use the set
Variable-Sheet Booklet option to make the proper selections.
10. Press Sample Printout again to print an output sample, and check the adjustment
results.
11. Make adjustments again if necessary. (Steps 6 - 9)
12. Press Save.
C Fold Position Adjustment
To adjust the C fold position:
1. Select C Fold-A4 or C Fold-8.5x11, and press Change Settings.
2. Press Sample Printout.
3. Select the tray and press the Start button.
4. Press Close.
5. Check the output sample, and measure the A and B fold position movement amounts.
6. Enter the measurement value you obtained in the previous step in Values A.
Note
Set value A and value B so that an edge of the paper does not extend past a fold
position of the paper. An edge of paper extending past a fold position of the paper
may cause a paper jam.
7. Press Sample Printout again to print an output sample, and check the adjustment
results.
8. Make adjustments again if necessary. (Step 6)
9. Press Save.
Z Fold Position Adjustment
To adjust the Z fold position:
1. Select Z Fold-A4 or Z Fold-8.5x11 and press Change Settings.
2. Press Sample Printout.
3. Select the tray and press the Start button.
4. Press Save.
5. Check the output sample, and measure the A and B fold position movement amounts.
6. Enter the measurement value you obtained in the previous step in Values A.
Note
Set value A and value B so that an edge of the paper does not extend past a fold
position of the paper. An edge of paper extending past a fold position of the paper
may cause a paper jam.
8-5 Xerox
®
Color C60/C70 Printer
System Administrator Guide
Image Registration Setups

Fuji Xerox Color C70 Specifications

General

Brand	Fuji Xerox
Model	Color C70
Category	All in One Printer
Language	English