1
Introduction
Overview
This guide is designed for a System Administrator with Network Administrator rights
who has knowledge of networking concepts as well as experience creating and managing
network user accounts.
This guide will help you install, configure, and manage the printer on a network.
Note
Network features are not available if you are connected over USB.
Note
Embedded fax features are not available for all printer models.
Configuration Steps
When configuring the printer for the first time, Xerox suggests that you follow these
steps in this order:
Note
Most configuration settings are located on the Properties tab in CentreWare Internet
Services. If your printer is locked, you must log in as the system administrator.
1. Connect an Ethernet cable from your printer to the network.
2. Confirm that your printer is recognized on your network. By default, the printer is
configured to receive an IP address from a DHCP server over a TCP/IP network.
3. Provide basic information such as your location, time zone, and date and time
preferences, by completing the Installation Wizard.
4. Print a Configuration Report listing the printer's current configuration. Review the
report and locate the printer's IP address.
1-1 Xerox
®
Color C60/C70 Printer
System Administrator Guide
To Next Page
Loading...
Need help?
General
