Fuji Xerox Color C70 System Administrator Guide

Setting Up Authentication for a USB SmartCard Reader System
To use the printer with a card reader system other than Xerox
®
Secure Access, you must
order and install the Xerox
®
Common Access Card Enablement Kit. The kit includes
hardware, software, and instructions for connecting and configuring your card reader
system.
Before you begin:
• Install the USB Enablement Kit.
• Install a Kerberos authentication server and configure with user accounts.
• Connect your card reader to the printer.
Configure Network Authentication Settings
1. Configure network authentication. For details, see Network Authentication.
2. Configure Kerberos server settings. For details, see Configuring Authentication Server
Settings for Kerberos.
Enable SmartCard Settings
To enable SmartCard settings:
1. At the printer Control Panel, login as Administrator, press the Machine Status button,
and touch the Tools tab.
2. Touch Authentication / Security Settings > Authentication > User Details Setup
> Use of SmartCard.
3. Touch Change Settings.
4. Touch Enabled.
5. Under Jobs Validated by Card, select Copy, Print or Fax/Scan, and touch Save.
Set the SmartCard Certificate Verification Mode
For additional security, you can set the printer to validate a user's SmartCard against
certificates stored on the printer.
To set the SmartCard verification mode:
1. At the printer Control Panel, login as Administrator, press the Machine Status button,
and touch the Tools tab.
2. Touch Authentication / Security Settings > Authentication > User Details Setup
> SmartCard Certificate Verification.
3. Touch Change Settings.
4. Touch Enabled.
6-7 Xerox
®
Color C60/C70 Printer
System Administrator Guide
Security

Fuji Xerox Color C70 Specifications

General

Brand	Fuji Xerox
Model	Color C70
Category	All in One Printer
Language	English