Fuji Xerox Color C70 System Administrator Guide

1. In CentreWare Internet Services, click Properties > Connectivity > Protocols >
SNMP Configuration.
2. Under SNMP Properties, select Enable SNMP v1/v2c Protocols, or Enable SNMP
v3 Protocol.
3. Under Authentication Failure Generic Traps, select Enabled if you want the printer
to generate a trap for every SNMP request received by the printer that contains an
invalid community name.
4. Click Apply.
Note
You must click Apply to save your settings or the protocol will remain disabled.
Editing SNMP v1/v2c Properties
Note
For security purposes, Xerox recommends that you change the SNMP v1/v2c public and
private community names from the default values.
Caution
Any changes made to the GET or SET community names for this printer require
corresponding changes to GET or SET community names for each application that uses
SNMP to communicate with this printer.
To edit SNMP v1/v2c properties:
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols >
SNMP Configuration.
2. Under SNMP Properties, click Edit SNMP v1/v2c Properties.
3. Type a name up to 256 characters for the Community Name (Read Only) or use the
default value of public.
GET returns the password for the SNMP GET requests to the printer. Applications
obtaining information from the printer using SNMP, such as CentreWare Internet
Services, use this password.
4. Type a name up to 256 characters for the Community Name (Read / Write) or use
the default value of private.
SET returns the password for the SNMP SET requests to the printer. Applications
that set information on the printer using SNMP, use this password.
5. Type a name up to 256 characters for the default Trap Community Name or use
the default value of SNMP_TRAP.
Note
The Default Trap Community Name is used to specify the default community name
for all traps generated by this printer. The Default Trap Community Name can be
overridden by the Trap Community Name specified for each individual trap
destination address. The Trap Community Name for one address may not be the
same Trap Community Name specified for another address.
5-7 Xerox
®
Color C60/C70 Printer
System Administrator Guide
Network Configuration

Fuji Xerox Color C70 Specifications

General

Brand	Fuji Xerox
Model	Color C70
Category	All in One Printer
Language	English