3 Paper and Other Media
100
Paper and Other Media
3
• When loading postcards in the HCF B1-S (optional) or the High Capacity Feeder C3-DS (optional),
the Post Card Kit is required.
• When you specify postcard for the Paper Type of a paper tray, specify postcard for the Paper Size as
well.
If you specify another paper size, the job will be canceled.
Loadable Quantity
The following describes the quantity that can be loaded in each paper tray.
*1 : When using FX J Paper
*2 : When using FX P Paper
Paper Feed Method
Automatic duplex print
The following describes the paper type and basis weight that can be used with automatic
duplex print.
Note •The paper size that can be used with automatic duplex print is 98.0 to 330.2 mm in width and 148.0
to 488.0 mm in total length.
• The paper length of 146.0 to 147.9 mm is also supported, but the image quality and paper feed
performance are not guaranteed.
Paper Tray Loadable Quantity
Tray 1, 2, 3
570 sheets (per tray)
*1
Tray 5 (Bypass)
250 sheets
*1
Tray 6
z
HCF B1
z
HCF B1-S
z
High Capacity Feeder C3-DS (upper
tray)
2,100 sheets (per tray)
*1
Tray 7
z
High Capacity Feeder C3-DS (lower tray)
2,100 sheets
*1
Tray T1
z
Inserter
200 sheets
*2
Paper Type Basis Weight Selection Group (Unit: gsm)
Uncoated 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Recycled 64 - 79, 80 - 90, 91 - 105
Coated 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Postcard 106 - 135, 136 - 157, 158 - 176, 177 - 220
Cast Coated 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Mat Coated 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Embossed 106 - 135, 136 - 157, 158 - 176, 177 - 220
To Next Page
Loading...
