23 Appendix
918
Appendix
23
Specifications
This section lists the main specifications of the machine. Note that the specifications and
the appearance of the product may change without prior notice.
Basic function/Print function
Type Console
Color Capability Full Color
Printing Resolution 2,400 × 2,400 dpi
Halftone/Printable Colors 256 color graduation for each color (16,700,000 colors)
Warm-up Time 300 seconds or less (at 20 °C room temperature)
Continuous Print Speed
z
A4: 80 pages/minute
z
A3: 44 pages/minute
Important • The speed may become slower depending on the data type and
features being used.
• Continuous 1-sided printing with 52 - 220 gsm paper
Output Paper Size [Tray 1 - 3]
Standard Size: Maximum A3, 11 x 17", Minimum A5
Non-standard Size: 140 × 182 mm - 330 × 488 mm
[Tray 5 (Bypass)]
Standard Size: Maximum A3, 11 x 17", Minimum Postcard
Non-standard Size: 98 × 148 mm - 330 × 660
*
mm
* : Printing with long length paper of 52 - 220 gsm is available. The continuous print speed
becomes slower. Some paper trays and output trays do not support long length paper.
Important • Image loss width: lead edge 4 mm; trail edge 2 mm; left and right
edges 2 mm.
• For Multi-model Print Driver 2, the non-standard size available for
Trays 1 - 3 and Tray 5 is 148 x 210 mm - 297 x 432 mm.
Output Paper Weight Tray 1 - 3: 64 - 256 gsm
Tray 5 (Bypass): 52 - 300 gsm
Important • It is recommended to use papers recommended by Fuji Xerox. For
using paper manufactured other than by Fuji Xerox, contact our
Customer Support Center.
Paper Feed Method/Paper
Tray Capacity
Standard
Tray 1: 570 sheets
Tray 2: 570 sheets
Tray 3: 570 sheets
Tray 5 (Bypass): 250 sheets
Maximum Paper capacity: 6,160 sheets (Standard + High
Capacity Feeder C3-DS)
Note • When using FX J Paper.
Output Tray Capacity 500 sheets
Note • When using FX J Paper.
• When using Offset Catch Tray.
Power Supply AC 220 - 240V±10%, 20A for both 50/60Hz±3%
Power Consumption Maximum power consumption: 4.8kW or less
Low Power mode: 192W or less
Sleep mode: 1.4W or less