EasyManua.ls Logo

Fuji Xerox Versant 80 Press

Fuji Xerox Versant 80 Press
1019 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 Problem Solving
894
Problem Solving
22
2 Move the handle [3b] upwards (1), turn the
knob [3a] to the right (2), and then remove the
jammed paper.
3 Return the handle [3b] to its original position.
4 Close the front top cover of the High Capacity Stacker.
Paper Jams in the Squarefold Trimmer Module
If paper jams inside the Squarefold Trimmer Module (optional), the lamp of the jammed
position lights up. Follow the paper jam clearance procedure corresponding to the lighting
lamp.
When the Lamp [E1] or [E2] is Lit ............................................................................................................................................ 894
When the Lamp [E3] is Lit.......................................................................................................................................................... 896
Note A remedy differs depending on where the paper jam occurs. Follow the instructions displayed and
remove the jammed paper.
When the Lamp [E1] or [E2] is Lit
1
Make sure that the machine has stopped, and
press the button on the left cover of the
Trimmer unit, and open the cover.

Table of Contents

Related product manuals