EasyManua.ls Logo

Fuji Xerox Versant 80 Press

Fuji Xerox Versant 80 Press
1019 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning the Machine
679
Maintenance
21
Cleaning the Document Cover and Document Glass
If the document cover and document glass are dirty, dirt may appear on copies and the
machine may not properly detect document sizes.
To ensure clean copies at all times, clean the machine about once a month.
Important Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or
coating on plastic parts.
Cleaning the machine with an excessive amount of water may cause the machine to malfunction or
damage documents during copying.
1 Wipe the document cover with a soft cloth
moistened with water to remove any dirt and
then wipe it with a soft, dry cloth.
Important Do not use cleaning agents other than water
or neutral detergent.
Note If dirt does not come off easily, try gently
wiping with a soft cloth moistened with a
small amount of neutral detergent.
2 Wipe the document glass with a soft cloth moistened with water to remove any dirt and
then wipe it with a soft, dry cloth.
Important Do not use cleaning agents other than water or neutral detergent.
Note If dirt does not come off easily, try gently wiping with a soft cloth moistened with a small amount of
neutral detergent.
Cleaning the Narrow Glass Strip and Document Presser
If the narrow glass strip and document presser of the document feeder are dirty, streaks or
smears may appear on copies and the machine may not properly detect document sizes.
To ensure clean copies at all times, clean the narrow glass strip and document presser about
once a month.
Important Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or
coating on plastic parts.
Cleaning the machine with an excessive amount of water may cause the machine to malfunction or
damage documents during copying or scanning.
1 Prepare a soft, dry cloth.
2 Press the power switch [ ] to switch off the power.
3 Wipe the narrow glass strip (1) and the guide
(2) (white, plastic part).
Important Do not use cleaning agents other than water
or neutral detergent.
Note If dirt does not come off easily, gently wipe it
with a soft cloth moistened with a small
amount of neutral detergent.
Document
cover
Document glass
Narrow glass
strip (1)
Guide (2)

Table of Contents

Related product manuals