Fuji Xerox Versant 80 Press

Fold Position Adjustment
711
Maintenance
21
13 Select [Save].
14 Select [Close] until the Services Home screen is displayed.
Note • When you configure settings under [System Settings] or [Setup] and then press the <Services Home>
button, the screen directly goes back to the Services Home screen.
Booklet Position Adjustment
Adjust the booklet position.
1 Select [Booklet], and then select [Change
Settings].
2 Select [Sample Printout].
3 Select the tray in which you loaded paper,
select [2-Sheet Stack], and press the <Start>
button.
A sample printout is printed.
4 Select the tray in which you loaded paper, select [15-Sheet Stack], and press the <Start>
button.
A sample printout is printed.
5 Select [Close].
6 Check the sample printout, measuring the position misaligned amount for 2-sheet stack
and 15-sheet stack.
7 Select [Booklet Fold State (2 Sheets)].