Paper Types
101
Paper and Other Media
3
Automatic reverse print
The following describes the paper type and weight that can be selected to output the print
side of one-side print facing down.
Note •The paper size that can be used with automatic reverse print is 98.0 to 330.2 mm in width and 148.0
to 488.0 mm in total length.
• The paper length of 146.0 to 147.9 mm is also supported, but the image quality and paper feed
performance are not guaranteed.
Supported Paper
Make sure to use appropriate paper.
If you desire to use paper not listed in the following, contact our Customer Support Center.
Standard Paper
When printing or copying on commonly used paper, use paper meeting the standards
described below. To copy or print as clear as possible, we recommend the following standard
paper.
* : Select the paper type setting for the paper loaded in a paper tray. For more information, refer to "Changing the Paper Settings"
(P.123).
Paper Type Basis Weight Selection Group (Unit: gsm)
Uncoated 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Uncoated Reload 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Recycled 64 - 79, 80 - 90, 91 - 105
Coated 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Coated Recycled 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Tab Stock 106 - 135, 136 - 157, 158 - 176, 177 - 220
Postcard 106 - 135, 136 - 157, 158 - 176, 177 - 220
Cast Coated 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Mat Coated 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Embossed 106 - 135, 136 - 157, 158 - 176, 177 - 220
Precut Tab (Embossed) 106 - 135, 136 - 157, 158 - 176, 177 - 220
Film 52 - 63, 64 - 80, 81 - 90, 91 - 105, 106 - 135, 136 - 157,
158 - 176, 177 - 220
Paper Basis Weight (Unit: gsm)
Paper Type
*
Colotech + 90 Uncoated
Colotech + Coated 120 Coated
J Paper 82 Uncoated
OS Coat W 127 Coated
To Next Page
Loading...
